| When |
What |
| 2020/01/25 |
The SARX parallel reverts back to using dt_atmos = 36, with n_split now set to 5.
|
| 2020/01/16 |
The values of dt_atmos and n_split were reverted back to 30 and 6 in the SAR-X parallel due to several model failures.
|
| 2020/01/14 |
A bug fix was applied to the post code used by the SAR and SAR-X parallels.
The winds coming out of the FV3 model are Earth-relative, and the UPP had been incorrectly assuming the winds were grid-relative.
|
| 2019/11/22 |
Radiation is now called every 20 mins instead of every 60 mins.
The FV3SAR-X parallel now uses dt_atmos = 36, k_split = 2, n_split = 4.
kord has been changed from 11 to 9 in the FV3SAR-X parallel.
|
| 2019/09/09/12 |
Switch from running with 65 level GFS configuration to 60 level NAM configuration with ptop=2 mb
hord_mt, hord_vt, hord_tm changed from 5 to 6, hord_dp changed from -5 to -6, hord_tr changed
from 10 to 8
|
| 2019/08/29/00 |
Change hord_tr (horizontal advection scheme for tracers) from 8 (fastest option) to 10 (less-diffusive option)
|
| 2019/07/30/12 |
Began running 12z cycle
|
| 2019/07/16/00 |
Moved run from WCOSS-Dell to WCOSS-Phase 2
|
| 2019/06/22/00 |
Changed vtdm4 back to 0.075
|
| 2019/06/18/00 |
Start of "low diffusion" test of 00Z FV3SAR initialized from FV3GFS, changed settings
- dt_atmos changed from 90 to 30 sec (more frequent update of physics)
- k_split changed from 6 to 2
- hord_mt, hord_vt, hord_tm changed from 6 to 5, hord_dp changed from -6 to -5 ("least diffusive" settings)
- vtdm4 changed from 0.075 to 0.03
|